What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 06:06

There are three different concepts here that are getting confused.
what exactly is a ‘surge’ protector?
This is where this question deviates from being a 'generic' question, and becomes more specific.
nine
(Dc diagram shown, AC is similar).
There are two important concepts here.
Ron Killings Confirms Report That Nick Khan Brought Him Back To WWE - Wrestlezone
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
In what circumstances might a chaperone be appropriate for a medical examination?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes Rainy Season and Lightning.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What we know about Trump's latest travel ban - BBC
One is “what exactly is in a ‘surge protector’ ? ”
An AC voltage/ current source, and an ac inductive load.
This one hit behind the barn.
N95 Masks And Air Purifiers: Wildfire Smoke Protection - The Weather Channel
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
Saturday Pocono Raceway Notebook - Jayski's NASCAR Silly Season Site
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[image of Common-mode choke]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
EchoStar Soars 49% As Trump Urges FCC To Settle Dispute - Investor's Business Daily
eight
This is 'the assistant's answer'
What does a fuse do?
Resident Evil Requiem: Release Date, Gameplay, And Everything We Know So Far - GameSpot
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
[old diagram got deleted by accident]
This device then solves the entire problem.
Popular Processed Foods Linked to Early Signs of Parkinson’s Disease - SciTechDaily
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
but this device (an Inductor) … impedes the rapid changes in the current.
so, what happens?
Why didn’t Obito confront Kakashi after he witnessed him kill Rin?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The other is “what does a “fuse” do?”
In schematic diagrams this is the symbol for a fuse:
It seems Mohan does not understand the difference between a comment and an Answer.
Upvotes:
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The bolt then partially travels down the line to your home.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
One
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What is lightning?
the problem then depends on "how fast does the fuse operate?".
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
These are simplified answers to the original question, and does not change anything I wrote above.
First Sentence:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then asserts :
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–16 [ OO OLAOYE OYEBODE ]
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
a photo is worth a thousand words.
Barnstars:
This is where the MOV conducts again, and dissipated the energy.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It also is a device that limits the change in current flow.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes the function of a fuse.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
A circuit breaker is similar, but is resettable.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
I post the exact comment here.
2024–10–10[John johnson John Johnson ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A fuse is a non-resetable over current circuit protector.
Edit 2024–10.